M15 stereo power amplifier
M15 STEREO
CONSOLIDATE YOUR POWER
The Bricasti M15 stereo amplifier is essential to any audio system, especially those designed by Bricasti. Like its larger mono-block counterpart, the M30, the M15 provides abundant power at critical points in the audio chain, creating a seamless sonic pathway from the source to the speakers. This performance is audible and tangible due to its fully differential and balanced architecture.
PRECISE
CONTROL
The power amplifier is a critical part of the audio chain. It has to take the incoming signal and amplify it evenly, and most importantly, deal with the loudspeaker's load and control its back EMF with precision. The sound of the M15 is intended to be transparent and revealing with low distortion dynamically with no sense of limits and compression irrespective of loudspeaker technology.
BALANCED
POWER
The M15 stereo power amplifier is a true reference design in analogue power amplification, an uncompromising design offering extremely low distortion with moderate power and a unique, truly balanced topology rarely seen in the industry. When combined with our M1 DAC or M12 Source Controller, the M15 can achieve a fully differential signal path from the converter to the loudspeaker.
The M15 intends to integrate seamlessly into your existing system while allowing for a more compact form factor. A unique feature like trim control lets you properly gain stage the M15, critical with today’s digital sources driving the amplifier directly. You also enjoy the same sonic benefits of the M28 monoblock with the stillpoints isolation designed directly into the feet.
MODERN
APPLICATION
M15 TECHNICAL SPECIFICATIONS
Total Harmonic Distortion:
THD+N less than 0.005% 20hz-20kHz at full rated power into 8 and 4 ohms.
Power:
125W into 8 ohms, 250W into 4 ohms, 500W into 2 ohms.
Frequency response:
10hz-150kHz, within 0.5db.
Signal to Noise:
Greater than 85db at full rated power.
Power Topology:
Fully Differential.
Balanced Input:
XLR connector 200k ohm impedance.
Unbalanced Input:
RCA connector 100k ohm impedance.
GENERAL SPECIFICATIONS
General Specifications:
EMC: Complies: EN 55103-1, EN 55103-2, FCC part 15 and Class B
rohs:
Complies with: EU RoHS Directive 2002/95/EC
Safety:
Certified to: IEC 60065, EN 55103-2
Operating Temperature:
32 F to 105 F (0 C to 40 C)
Storage Temperature:
-22 f to 167 F (-30 C to 70 C)
Finish:
Anodised aluminum
DIMENSIONS:
16.75” x 18“ x 10.5”
42,54, 45.72, 26.67 cm
WEIGHT:
90lbs, 40.82 kg.
MAINS voltage:
-100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
TRIGGER IN:
TRS connector for 5V external trigger.
INPUT TRIM:
0db, -6db, -12db,-18db of attenuation.
Power consumption:
60 Watts Standby, 2W idle
Warranty parts and labor:
5 years non-trans.
MANUAL:
HANDMADE
IN THE USA
All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.