M30 monoblock amplifier
M30 mono
AMPLIFIED PERFORMANCE
The M30 monoblock amplifier is the latest iteration of the powerful M28 variant in a rack-friendly form factor. For those who desire the benefits of mono amplifiers in a more compact size, the M30 boasts the same exceptional performance as the M28, with a chassis height of only 10.5 inches and a width of 17 inches.
compact
FORM FACTOR
The M30 integrates the same superb current delivery as the taller M28 in a smaller, wider footprint for those desiring additional power in smaller spaces or rack-friendly set-ups. A single, powerful transformer and custom built capacitor banks render a beautiful sense of depth and dimension that needs to be experienced to truly be appreciated.
TRULY
DIFFERENT
Not all devices are balanced end-to-end. The M30's fully differential design delivers a fast, low distortion, open and harmonically accurate musical experience. Paired with any of the Bricasti lines of fully differential digital to analogue converters, a balanced system can be enjoyed from source to speaker.
OPTIMAL
BY DESIGN
The M30 chassis is designed to keep critical components in an optimal temperature range with the generous use of aluminium, crafted from solid blocks and a clever design that directs airflow through the top. Stillpoints isolation devices have been carefully designed directly into the feet for maximum isolation from vibration.
PLATINUM
FINISH
In addition to standard Black and Argento finishes, a Platinum finish is listed as an option for the M30. This plating is based on anodising the base aluminium metal first with copper, then nickel, and finally a 40-micron coating of pure Platinum in-house.
This stunning mirror finish offers outstanding looks and increases the mass of the chassis with precious metals, allowing an additional step in performance with better tonality and resolution thanks to its strong RF rejection.
M30 TECHNICAL SPECIFICATIONS
Total Harmonic Distortion:
THD+N less than 0.005% 20hz-20kHz at full rated power into 8, 4 and 2 ohms.
Power:
200W into 8 ohms, 400W into 4 ohms, 800W into 2 ohms.
Frequency response:
10hz-150kHz, within 0.5db.
Signal to Noise:
greater than 95db at full rated power.
Power Topology:
Fully Differential, bi polar.
Balanced Input:
XLR connector 200k ohm impedance.
Unbalanced Input:
RCA connector 100k ohm impedance.
GENERAL SPECIFICATIONS
General Specifications:
EMC: Complies: EN 55103-1, EN 55103-2, FCC part 15 and Class B
rohs:
Complies with: EU RoHS Directive 2002/95/EC
Safety:
Certified to: IEC 60065, EN 55103-2
Operating Temperature:
32 F to 105 F (0 C to 40 C)
Storage Temperature:
-22 f to 167 F (-30 C to 70 C)
Finish:
Anodised aluminium, optional Platinum with nickel plating, brass knobs and buttons.
DIMENSIONS:
10.5” x 17“ x 18”
26.67, 43.18 45.72 cm
WEIGHT:
105lbs, 47.62 kg.
MAINS voltage:
-100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
TRIGGER IN:
TRS connector for 5V external trigger.
INPUT TRIM:
0db, -6db, -12db,-18db of attenuation.
Power consumption:
60 Watts (2W idle)
Warranty parts and labor:
5 years non-trans.
MANUAL:
Click here to open
HANDMADE
IN THE USA
All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.