m32 monoblock power amplifier
m32 absolute
POWER DELIVERY
The M32 monoblock is the latest rendition in the Bricasti line of power amplifiers. The flagship M32 builds upon the award-winning M28 amplifier and raises the bar to a new level of enjoyment with impressive depth and solidity that must be experienced to be fully appreciated.
The M32 has an impressive 50% more current delivery when compared to the M30 monoblock amplifier: high current delivery, extremely low noise and distortion with even less power supply ripple. The power delivery of the M32 is increased to 250W into 8 ohms, 500W into 4 ohms, and current limited for safety at 1000W into 2 ohms, more than 1kw peak power into 4 ohms.
SUPERCHARGED
CURRENT
FULLY
DIFFERENTIAL
Not all audio devices offer balanced end-to-end performance. The M32 features a fully differential design that provides a fast, low-distortion, and harmonically accurate musical experience. When paired with any of the Bricasti fully differential digital-to-analog converters, you can achieve a truly balanced system from the source to the speaker.
Dialed-In
DESIGN
The improved chassis is designed to accommodate a larger custom-made power transformer, allowing for greater separation between the power components and the voltage and current gain sections of the amplifier. This design results in exceptionally low noise performance, eliminating any practical interference from the power supply components and the amplifier's gain sections.
PLATINUM
FINISH
In addition to standard Black and Argento finishes, a Platinum finish is listed as an option for the M32. This plating is based on anodising the base aluminium metal first with copper, then nickel, and finally a 40-micron coating of pure Platinum in-house.
This stunning mirror finish offers outstanding looks and increases the mass of the chassis with precious metals, allowing an additional step in performance with better tonality and resolution thanks to its strong RF rejection.
M32 TECHNICAL SPECIFICATIONS
Total Harmonic Distortion:
THD+N less than 0.005% 20hz-20kHz at full rated power into 8, 4 and 2 ohms.
Power:
250W into 8 ohms, 500W into 4 ohms, 1000W into 2 ohms.
Frequency response:
10hz-150kHz, within 0.5db.
Signal to Noise:
greater than 95db at full rated power.
Power Topology:
Fully Differential, bi polar.
Balanced Input:
XLR connector 200k ohm impedance.
Unbalanced Input:
RCA connector 100k ohm impedance.
GENERAL SPECIFICATIONS
General Specifications:
EMC: Complies: EN 55103-1, EN 55103-2, FCC part 15 and Class B
rohs:
Complies with: EU RoHS Directive 2002/95/EC
Safety:
Certified to: IEC 60065, EN 55103-2
Operating Temperature:
32 F to 105 F (0 C to 40 C)
Storage Temperature:
-22 f to 167 F (-30 C to 70 C)
Finish:
Anodised aluminium, optional Platinum with nickel plating, brass knobs and buttons.
DIMENSIONS:
15” x 17“ x 18”
38.10, 43.18 45.72 cm
WEIGHT:
120lbs, 54.43 kg.
MAINS voltage:
-100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
TRIGGER IN:
TRS connector for 5V external trigger.
INPUT TRIM:
0db, -6db, -12db,-18db of attenuation.
Power consumption:
60 Watts Standby, 2W idle
Warranty parts and labor:
5 years non-trans.
MANUAL:
HANDMADE
IN THE USA
All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.