M1 SERIES II STEREO D/A
M1 SERIES II
STUNNINGLY EXPRESSIVE
The M1S2 (Series II) brings a fresh look and upgraded features to the M1 series, succeeding the previous M1SE model. This new design reflects Bricasti Design’s extensive expertise in high-precision D/A engineering, optimised for audio purists. Focused on simplicity and performance, the M1S2 includes the latest MDx processor, high-current twin linear power supplies with larger performance capacitors, and a robust, handcrafted chassis milled from solid aluminium. Standing taller than its predecessor, the M1S2 now has upgraded Stillpoint feet as standard, setting new performance milestones for the series.
EXTREME
PERFORMANCE
A high-performance linear power architecture delivers a clean signal with exceptionally low noise and ample headroom. With point-to-point wiring and Stillpoint isolation integrated directly into the chassis, your music will experience enhanced depth, detail, and dimensionality. Improved spatial cues and separation provide a truly immersive listening experience.
PURITY
OF SIGNAL
The M1S2 utilises Bricasti Design's latest proprietary MDx digital platform, clocking algorithms and filter technology for exceptional performance without the use of SRC's so signals stay native. The digital section is coupled with a pristine analogue path with the goal of delivering the most faithful possible representation of tonality, precision and dimension.
MASTERFULLY
CONNECTED
The M1S2 digital input selection is well-appointed to fit most systems. It also features a fully differential design, which creates a less resistant output signal path, ideal when matched with a fully differential M20 preamplifier and the Bricasti range of power amplifiers.
MDx OS
THE NEXT GENERATION
OF INNOVATION
The Bricasti MDx digital processor is a new proprietary digital platform, years in development that transforms and refines our full line of D/A converters. Exceptionally accurate with regards to timing and incoming master clocking, network improvements to yield better sonic performance over the network and the latest inclusion of DSD256 over USB. MDx takes audio to a whole new level with sublime precision.
EFFORTLESS
NETWORK STREAMING
The M1S2 plays ethernet wired over your data network. In addition, audio listeners have become accustomed to having a computer server and additional storage drives directly in the listening environment. This can get messy with the added cables and power supplies that accompany them. With the built-in Network Player you can find new freedom from your server devices and place them anywhere on your network, away from your system.
I2S PERFECT
PARTNER
The M19 SACD/CD Digital Transport offers our proprietary I2S digital output for exclusive use with all Bricasti DACs. This interface between the player and one of our DACs, in exchange for the Ethernet Network option, creates the perfect match between the two devices, as though the DAC was part of the M19.
This enhances the performance with stunning results: a convincing audible gain across the whole sound spectrum, with unmistakable added clarity and enhanced layering thanks to its pure and simplistic design. The I2S input is now listed as an option for all new Bricasti DACs and can be obtained by previous customers as an upgrade path.
PLATINUM
FINISH
In addition to the standard Black and Argento finishes, an optional Platinum finish is available for the M1S2. This finish involves anodizing the base aluminium metal, starting with a layer of copper, followed by nickel, and finally applying a 40-micron coating of pure Platinum in-house. The stunning mirror finish enhances the aesthetics and increases the chassis's mass with precious metals. This added weight improves performance, offering better tonality and resolution due to its effective RF rejection.
M1S2 TECHNICAL SPECIFICATIONS
Digital Inputs
XLR: AES/EBU 24-bit Single Wire, RCA: SPDIF, Optical: Toslink 44.1- 96k, USB 2, Ethernet (optional), I2S (optional)
Sample Rates AES, SPDIF, AUX:
44.1 kHz, to, 192khz, DSD 64fs as DoP
Sample Rates USB:
44.1 kHz, to, 384kHz, DSD 64fs 128Fs 256Fs Native and DoP
ON BALANCED OUTPUTS
Balanced Analog Outputs:
XLR balanced (pin 2 hot)
Impedance:
40 ohm
Output:
@ full scale +16.5 dbm (5.2V RMS)
MAx Output Level:
+22 dbm
Safety:
Certified to: IEC 60065, EN 55103-2
THD+N @ 1k:
.0006% @ 0dbfs / .0004% @-30dbfs PCM sigma delta<
ON UNBALANCED OUTPUTS
UNBalanced Analog Outputs:
RCA
Impedance:
40 ohm
Output:
Full scale at front panel +6 dbm (1.2V RMS)
Output Level:
Full scale at front panel +6 dbm (1.2V RMS)
GENERAL SPECIFICATIONS
General Specifications:
EMC: Complies: EN 55103-1, EN 55103-2, FCC part 15 and Class B
rohs:
Complies with: EU RoHS Directive 2002/95/EC
Operating Temperature:
32 F to 105 F (0 C to 40 C)
Storage Temperature:
-22 f to 167 F (-30 C to 70 C)
Finish:
Anodised aluminium, Optional Platinum with nickel plating, brass knobs and buttons.
Shipping Dimensions:
22”x 17”x 7”
55,88, 43,18, 17,78 cm
WEIGHT:
15 lbs, 6.8 kg.
Shipping Weight:
18 lbs, 8,2 kg.
Sample Rates ETHERNET:
44.1 kHz to 384kHz PCM, 64x 128x Native and DoP
JITTER:
8 psec @ 48k / 6psec @ 96k
D/A Conversion:
PCM 24 bit delta sigma 8x oversampling, 64x 128x 256x Native and DoP
Frequency Response @44.1k:
10 Hz- 20 kHz +0dB, -.2 dB
Dynamic Range:
>120dB A-Weighted
MAINS voltage:
-100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
TRIGGER OUT:
TRS mini jack, Tip ground, Sleeve 5V
Power consumption:
28 Watts
Warranty parts and labor:
2 years non-trans.
DIMENSIONS:
17” x 12.5“ x 4.5”
43,18, 31,75, 11,43 cm
D/A Conversion:
PCM 24 bit delta sigma 8x oversampling, DSD 128 Native
Frequency Response @44.1k:
10 Hz- 20 kHz +0dB, -.2 dB
Dynamic Range:
>120dB A-Weighted
THD+N @ 1k:
.0006% @ 0dbfs / .0004% @-30dbfs PCM sigma delta
MANUAL:
HANDMADE
IN THE USA
All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.